Advent Calendar Wall Hanging

by Alisa

I found this Makower UK 'Wrap It Up' advent calendar panel on Etsy when I was searching for another Makower UK fabric earlier this year. I bought it and began planning to make it for my nephew and two nieces this Christmas.

The instructions for the calendar are printed at the top of the panel. I found this video tutorial from Makower UK very helpful in putting it together. They demo a different panel but the assembly is the same.

I started by cutting the panel and the pocket strips on the solid lines. I then used my mini iron to prep the pocket strips - creating the hems and box pleats and then sewing them to the calendar panel.

After I had finished sewing all the pockets to the top, I played around with the fancy stitch options on my new machine and added some stars and a 'Merry Christmas' greeting to the borders.

I used coordinating fabric from the same line (ordered from Needle In A Fabric Stash on Etsy) for the backing.

I added a sleeve of that fabric to the backing for hanging. They demoed this technique on the video tutorial. My sleeve was about 12" long by 3" wide. One helpful tip on the video was to sew the 2nd side of the open sleeve close to the first seam to create a tunnel for the dowel. Make sure to sew the sleeve close to the top of the backing.

I layered the backing (right side up), batting and then the top (right side down) and used my even-feed foot from Janome to sew around all 4 sides, leaving about 6 inches open at the bottom for turning.

I turned it, ironed the unsewn hem at the bottom, and then top-stitched all four sides using the even-feed foot. I then ironed the entire wall hanging to fuse the batting to the top and back.

I added a .5" dowel cut to size and a ribbon for hanging. Once I added the candy to the pockets the Advent Calendar was complete.

This was my first project on my new Janome Skyline S3 and I just love it; the machine and the advent calendar!

I can't find this panel, but Makower UK has several other advent panels available that are very cute.

This is a fun project and it was very well received by my nieces and nephew. They love it!

Comments

Katie McGrath said…

I'm sure this calendar will be treasured for years! It's wonderful. Katie McGrath

12/15/2019

Notes on Purl Soho Cross-back Apron pattern

Purl Soho Cross-back Apron, regular sized, front view Purl Soho Cross-back Apron, regular sized, back view by Linda Theil This is the Purl Soho Cross-back Apron featured on their website at https://www.purlsoho.com/create/2015/11/20/cross-back-apron . Their page includes complete directions for making this one-size-fits-most apron with large, side-pockets and cross-back straps. This retro apron is so nicely made and looks so much like the apron my grandma wore in the Nineteen-fifties that I had to make one for my friend who appreciates the nostalgia and the beauty of this design. Although this apron pattern, as published, can adjust to several sizes from 2-10; I also made a larger option, adjusting the width of the pattern pieces to accommodate up to size 16 and up. Size adjustment may also be made by varying the length of the straps. These notes are a record of my experience with the pattern, and should only be viewed as...

Plover Pouch adaptation

by linda Theil I made several adaptations to Noodlehead's "Plover Pouch" for Emerson's birthday present. I had previously given her a medium-sized "Plover Pouch" that she added a cross-body strap to, so thought I'd make her a larger, sturdier bag with the crossbody strap built in. I modified the zip-end detail featured in the pattern to allow me to insert the strap ends into the top of the gusset. The "Plover Pouch" pattern includes three sizes with the largest measuring 12 x 7.5 x 4-inches. For the large bag, I used "Hedgehog Hollow" cottons by In the Beginning fabrics for the front and back exterior panels and the lining. I machine quilted the front and back panels to increase the stiffness of the bag, and I interfaced the lining with iron-on fleece as well. That was actually an accident, but the fleece interfacing in the lining worked out pretty well. The side-panel and bag-base gusset are made of Mora faux leather. I used a #5 dou...

Notebook cover from Arabesque

by Linda Theil I just finished making the "Crafted Life Companion" notebook-cover designed by Australian Ali Phillips of Arabesque Scissors . I've made several of Phillips' patterns and have come to experience Phillips as creating at the same stratospheric level as English designer Diane Spencer Ogg for brilliant design innovation and attention to minute specificity in their patterns. Both creators are also highly professional and skilled presenters in their step-by-step demonstration videos for every design. Please see Phillips' video at the end of this post. The Arabesque notebook cover is designed to fit an A5 notebook size, and includes a sleeve for notepads up to 4 x 8-inches. Other pocket options are included in the pattern -- most of which I left out in my first version. I did take advantage of a marvelously useful innovation Phillips provided: a beautifully designed "coloring page" that helped enormously to keep all my pattern pieces organized....

Appleton Dance

Search This Blog