Skip to main content

Spencer Ogg Cosmetics Pod



By Linda Theil

I asked Alisa if she wanted a cosmetics bag to go with her set of Spencer Ogg Packing Pods and she said, "Duh!"

I had made her a set of the lightweight packing pods with a "layer cake" of ten-inch squares of Robert Morris reprints from Moda, and blogged about the make here at "Spencer Ogg Packing Pods". Diane Spencer Ogg also offers a free pattern for a "Cosmetic Pod" along with a video tutorial on her YouTube channel that I wanted to try.

Unlike the lightweight "Packing Pods", Spencer-Ogg recommended a sturdier fabric to give the little cosmetics box/pod some structure. She also said the pattern could be made in larger sizes by increasing the size of the free printed pattern.

I had some of the Robert Morris ten-inch squares left over from making Alisa's packing pods, that I could use to make a matching cosmetics pod. I had to piece the ten-inch squares to make a piece of fabric large enough for the one-piece pod pattern. I had increased the pattern to 120-percent of the original size, making a pattern of roughly 15 x 15-inches.

When I printed the pattern out at 120-percent, I had to tape on a half-inch wide piece of paper to the bottom of the Number-A2 pattern piece because the enlargement didn't quite fit on a piece of standard 8.5 x 11-inch paper. The pattern below shows the one-piece, cosmetics-pod pattern increased 120-percent to be laid out with the long horizontal edge of the pattern placed on the fold of fabric before cutting.


To make my fabric, I sewed two identical pieces of a directional fabric together so that one piece had the directional print facing right-way-up, and the second piece had the directional print facing upside-down. Then I sewed two identical pieces of coordinating ten-inch squares together, and cut them down the middle to make two 5 x 20-inch rectangles. Then I sewed one of the narrow, coordinating rectangless to each side of the stitched directional squares to make a 20 x 20-inch piece of fabric that I backed with medium-weight, iron-on interfacing.


When I laid the pattern out on the pieced fabric, I positioned the pattern so that the seam between the two directional pieces of fabric fell in the middle of the large indented sections of the pattern indicating where the bottom of the pod would be, so that the change in direction would be unseen on the finished pod.

The standard-size, cosmetics-pod pattern called for a 12-inch, number-five zipper; for the 120-percent sized pod, I used 15-inches of continuous zipper, and that seemed to work fine. The excess zipper is trimmed away during the construction of the pod.

It's hard to describe the pleasure of making a Spencer Ogg bag. This little pod is simple, quick, and easy to make; yet, the clever design, meticulous construction detail, and elegance of the finished piece make this pattern, like all Spencer Ogg designs, so much fun to work with.

The finished size of this 120-percent increased "Cosmetics Pod" is eleven-inches wide, by five-inches high, by three-inches deep at the bottom.




I love it.



Comments

Popular posts from this blog

Notes on Purl Soho Cross-back Apron pattern

Purl Soho Cross-back Apron, regular sized,  front view Purl Soho Cross-back Apron, regular sized,   back view by Linda Theil This is the Purl Soho Cross-back Apron featured on their website at  https://www.purlsoho.com/create/2015/11/20/cross-back-apron . Their page includes complete directions for making this one-size-fits-most apron with large, side-pockets and cross-back straps. This retro apron is so nicely made and looks so much like the apron my grandma wore in the Nineteen-fifties that I had to make one for my friend who appreciates the nostalgia and the beauty of this design. Although this apron pattern, as published, can adjust to several sizes from 2-10; I also made a larger option, adjusting the width of the pattern pieces to accommodate up to size 16 and up. Size adjustment may also be made by varying the length of the straps. These notes are a record of my experience with the pattern, and should only be viewed as...

Sujata Shah's no-template piecing

16-inch, four-patch "pinwheel" block designed by Sujata Shah, pieced by Linda Theil 2016 Fabrics:  Sturbridge line by Kathy Schmitz for Moda and Daily Zen line by Michael D'Amore for Benartex. I attended quilt artist Sujata Shah's "Pinwheel" class sponsored by the Greater Ann Arbor Quilt Guild  at Washtenaw Community College in Ann Arbor  on July 17, 2016. Shah is inspired by the work of Gee's Bend quilters and has developed a no-template method of piecing to emulate their unstructured designs. Shah's book, Cultural Fusion Quilts , is available at Amazon.com.  Shah's uses four 11-inch squares to make each block, but she said a quilter could use any size base they choose. Since I had a package of precut 10-inch squares in the "Sturbridge" design by Kathy Schmitz for Moda, I based my block on that size. We were instructed to bring a variety of backgrounds in one color and brights in another color. Since I signed up late for ...

Notebook cover from Arabesque

by Linda Theil I just finished making the "Crafted Life Companion" notebook-cover designed by Australian Ali Phillips of Arabesque Scissors . I've made several of Phillips' patterns and have come to experience Phillips as creating at the same stratospheric level as English designer Diane Spencer Ogg for brilliant design innovation and attention to minute specificity in their patterns. Both creators are also highly professional and skilled presenters in their step-by-step demonstration videos for every design. Please see Phillips' video at the end of this post. The Arabesque notebook cover is designed to fit an A5 notebook size, and includes a sleeve for notepads up to 4 x 8-inches. Other pocket options are included in the pattern -- most of which I left out in my first version. I did take advantage of a marvelously useful innovation Phillips provided: a beautifully designed "coloring page" that helped enormously to keep all my pattern pieces organized....